motorzoo

800Wh 48V LiFePO4 Charger

 

Summary

The motorzoo 800Wh 48V LiFePO4 charger is a powerful, safe, and reliable high quality 48 Volt, 16 Amp power transformer. It has been designed and configured to meet the demands of the motorzoo range of LiFePO4 batteries.

 

Special Features

  • RCM Compliance. This means the charger is fully compliant with the Australian EESS (Electrical Equipment Safety Scheme).
    Don’t buy electrical equipment that is not compliant – it anything goes wrong, your insurance may be voided.
  • Onboard Cooling Fan. Charging at 16 Amps will generate a lot of heat.
    So a cooling fan for this type of charger is recommended
  • In-built Safety. Protections against: Short circuit; excess charge; excess discharge; excess current; excess temperature.
  • Onboard Display. The display panel indicates the voltage, current, and temperature parameters during the charging cycle.

$445.50

Availability: In stock

SKU: CBC-002-P1

About the motorzoo 800Wh 48V LiFePO4 Charger

The motorzoo 800Wh 48V LiFePO4 charger is a 48 Volt, 16 Amp power source that has been designed and built to meet our high demands.
The battery charger has been designed and configured to be fit for purpose for the full range of motorzoo electric outboard motors.
Our demands are for a powerful, safe, and compliant high quality power supply for charging the full range of motorzoo LiFePO4 batteries.
Specific characteristics of the 800Wh 48V LiFePO4 charger include the following:

RCM Compliant

Not all battery chargers are compliant with Australian ESSS standards.
You may be able to buy a non-compliant power supply online somewhere, but the seller is breaking Australian law.
Also, if you have issues with the charger (for example, a fire), then any insurance cover may be voided.

Fast Charging

The batteries must be able to take high current loads while charging, otherwise charging takes too long.
This charger has a rated charging output of 16 Amps, which is lower than the rated capacity of our batteries.
It may take a little longer to charge the batteries, but it is much safer.

Automatic detection

The charger and batteries communicate during the charging cycle.
When the batteries are fully charged, the charger will automatically shut off.

Onboard display

The display panel indicates the voltage, current, and temperature parameters during the charging cycle.
Our LiFePO4 batteries also feature a bluetooth Smartphone App for monitoring / diagnostics.

Smart Management

Our batteries feature a Battery Management System (BMS) which controls and regulates the individual battery cells inside.
And the BMS supports multiple units charging concurrently or individually, and prevent units from charging (leaking to) each other.

The BMS also protects against:

  • Short circuit. Which is especially important for marine application
  • Excess Charging. Which is a known cause of hazard in ternary lithium batteries.
  • Excess Temperature. Which can cause permanent damage to the battery cells.
  • Excess Current. Which can cause damage to downstream electrical components.

Special Features of the motorzoo 800Wh 48V LiFePO4 Battery Charger

The motorzoo 800Wh 48V LiFePO4 Battery Charger is made especially for our marine batteries.
It is a, safe, powerful, high performance power unit with customised features and an innovative design, as follows:
  • RCM Compliance. This means the charger is fully compliant with the Australian EESS (Electrical Equipment Safety Scheme).
    Don’t buy electrical equipment that is not compliant – it anything goes wrong, your insurance may be voided.
  • Onboard Cooling Fan. Charging at 16 Amps will generate a lot of heat.
    So a cooling fan for this type of charger is recommended
  • In-built Safety. Protections against: Short circuit; excess charge; excess discharge; excess current; excess temperature.
  • Onboard Display. The display panel indicates the voltage, current, and temperature parameters during the charging cycle.
Weight 20 kg
Dimensions 50 × 20 × 25 cm
Battery - Cell Model

IFP27148134 -3.2V50AH

Battery - Voltage

48 Volt

Battery - Discharge Current (Max.)

100 Amps

Battery - Discharge Current (Std.)

50 Amps

Battery - Rated LifeCycles

2500

Ingress Protection (IP)

IP67

Control Settings

Smartphone App Control

Connection

Bluetooth Connection

Reviews

There are no reviews yet.

Be the first to review “800Wh 48V LiFePO4 Charger”

Your email address will not be published. Required fields are marked *

Shopping Cart